'
TEL 262-654-3833 | Hours 8AM-5PM Central Standard Time M - F
Select Page
Sale!

Schneider Electric 865-1030-01 Solar Charge Controller 60 Amp XW-MPPT60-150

$ 719.00

Schneider Electric 865-1030-01 Solar Charge Controller 60 Amp XW-MPPT60-150, popular high quality solar charge controller, maintains ready voltage charge to off-grid battery systems. Battery voltage operating range 0 Vdc to 80 Vdc, PV array operating voltage 140 V, Max. PV array open circuit voltage 150 V including temperature correction factor. Authorized US distributor.

Description

Schneider Electric 865-1030-01 Solar Charge Controller 60 Amp XW-MPPT60-150. The Conext XW-MPPT-60-150 is a PV charge controller that tracks the maximum power point of a PV array to deliver the maximum available current for charging batteries. When charging the Schneider Electric 865-1030-01, the MPPT 60 150 regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.

Higher return on investment

  • Maximum Power Point Tracking (MPPT) algorithm continually seeks the maximum power available from the PV array
  • Improve battery life with selectable multi-stage temperature-compensated charging
  • Five-year standard warranty

Flexible

  • Stand-alone application or full integration with Conext XW and Conext SW inverter/charger system
  • Compatible with any brand of PV module
  • Remote monitoring and configuration available

Easy to install

  • Configurable auxiliary output
  • LCD screen with faceplate buttons for configuration and system monitoring
  • Integrated PV ground fault protection for negative grounded arrays

Electrical specifications

  • Nominal battery voltage: 12, 24, 36, 48, 60 V
  • Battery voltage operating range: 0 Vdc to 80 Vdc
  • PV array operating voltage: 140 V
  • Max. PV array open circuit voltage 150 V including temperature correction factor
  • Max. array short-circuit current 60 A (48 A @ STC)
  • Max. charge current 60 A (for all battery voltages except 60 V)
  • Max. and min. wire size in conduit #6 AWG to #14 AWG (10 to 2.5 mm²)
  • Max. output power 3500 W
  • Charger regulation method Three-stage (bulk, absorption, float) plus manual equalization
  • Two-stage (bulk, absorption) plus manual equalization
  • Supported battery types Flooded, GEL, AGM, Custom

Compatible products

  • Conext XW+ inverter/charger (230 V) XW 7048 E product no. 865-7048-61/XW 8548 E product no. 855-8548-61
  • Conext XW+ inverter/charger (120/240 V) XW 5548 NA product no. 865-5548-01/XW 6848 NA product no. 865-6848-01
  • Conext SW (230 V) SW 2524 product no. 865-2524-61/SW 4024 product no. 865-4024-61/SW 4048 product no. 865-4048-61
  • Conext SW (120 V) SW 2524 product no. 865-2524/SW 4024 product no. 865-4024/SW 4048 product no. 865-4048
  • Conext System Control Panel Product no. 865-1050
  • Conext Automatic Generator Start Product no. 865-1060
  • Conext ComBox Product no. 865-1058
  • Conext portable installation and configuration tool Product no. 865-1155-01

XW-MPPT60-150 specifications

Additional information

Weight 18 lbs
Dimensions 19 × 9 × 10 in
Manufacturer Part Number

Reviews

There are no reviews yet.

Be the first to review “Schneider Electric 865-1030-01 Solar Charge Controller 60 Amp XW-MPPT60-150”

Your email address will not be published. Required fields are marked *

Share This