The Sterlco FT94-6-15 Double Inlet-Double Outlet Float & Thermostatic Trap 1.5″ NPT 15 PSI configuration are applicable to all types of steam heating systems and steam process equipment that produce exceptionally large amounts of condensate. These traps operate efficiently for low, medium & high pressure applications. Their purpose is to discharge air and condensate while preventing steam from entering the return piping. These Sterlco FT94-6-15 traps are manufactured in two sizes (1-1/2” and 2”) for handling capacities of 425 to 24,000 lbs. of condensate per hour. Four (4) possible connections allow greater flexibility in piping.
- Heavy duty construction throughout. Body and cover are rugged cast iron; all working parts are made of non-corrosive metals especially adapted for this service.
- Instantaneous valve action. Design of the float valve assembly permits rapid and positive valve action. Location of the valve assures a deep water seal at all times.
- Continuous rapid flow of condensate. A lever operated discharge valve opens wide so that large volumes of condensate can flow continuously from trap. Increased full flooded condensate capacity with quick and positive action is assured by the float mechanism’s double fulcrum design.
- Minimum maintenance. All working parts may be inspected, removed or repaired without disturbing piping connections. Clean-out plug at bottom of trap body permits easy flushing.
- Type: FT-94
- Low / Meduim / High
- Size: 1-1/2, 2 (inches)
- Model: 15 (psid).
- Orifice: .625 (inch)
- Max. Condensate: 11750 lbs. per hour
- Pipe Size: 1.50 NPT
- Long A: 8.0 (inch)
- Height B: 8.0 (inch)
- Width C: 7.0 (inch)
- Weight: 24 lbs.
- Body: Cast Iron
- Cap: Cast Iron
- Thermal Element: Stainless Steel, Brass
- Bracket: Stainless Steel
- Gasket: Cellulose, Non-asbestos Fiber
- Seat: Stainless Steel
- Valve: Stainless Steel
- Clip: Stainless Steel
- Washer, Screw: Stainless Steel
- Lever & Float Assy: Stainless Steel
- Plug: 1/4” NPT Steel