'
TEL 262-654-3833 | Hours 8AM-5PM Central Standard Time M - F
Select Page
Sale!

Sterlco FT96-6-60 Float & Thermostatic Trap Brass & Stainless Steel Trim 1.5″ NPT 60 PSI

$ 1,227.00

Sterlco FT96-6-60HC Float & Thermostatic Trap Brass & Stainless Steel Trim 1.5″ NPT 60 PSI working range and condensate flows of 15500 lbs/hr at 60 PSI. The valve location assures a constant deep water seal.

Description

Sterlco FT96-6-60 Float & Thermostatic Trap Brass & Stainless Steel Trim 1.5″ NPT 60 PSI is applicable to all types of steam pressure heating systems. The trap’s purpose is to move air and water while preventing steam from entering return piping. These traps are manufactured in seven models for handling capacities of 1,500 to 54,000 lbs. of condensate per hour and operate efficiently with pressures up to 60 lbs.

FT96 SPECIFICATIONS SHEET PDF

Materials Specifications

  • Body: Cast Iron
  • Cap: Cast Iron
  • Float Ball: Stainless Steel
  • Rod: Brass
  • Gasket: Non-asbestos Fiber
  • Pins: Stainless Steel
  • Valve: SST & Brass
  • Seat: SST & Brass
  • Linkage: Cast Brass
  • Thermo Trap: Cast Brass
  • Thermo Disc: SST & Brass
  • Plug, cleanout: Steel

Features

  1. Simple, rugged construction. This Sterlco® trap is a mechanically simple and durable combination of a float and thermostatic trap. All working parts are made of non-corrosive metals especially adapted for this service.
  2. Sensitive thermostatic action. Charging the thermostatic disc under high vacuum assures sensitive and positive response to temperature and pressure over entire operating range. Disc corrugations are shaped to reduce hinge action at the rim of the disc and evenly distribute disc motion.
  3. Instantaneous valve action. Design of the float vale assembly permits rapid and positive valve action. Location of the valve assures a deep water seal at all times.
  4. Continuous rapid flow of water. A lever operated discharge valve opens wide so that large volumes of water can flow continuously from trap.
  5. Thorough testing. In addition to tests made of the completed trap, each thermostatic disc is tested before it is assembled into the trap.
  6. Minimum maintenance. All working parts may be inspected, removed or repaired without disturbing piping. Clean-out plug permits easy flushing of dirt.

Additional information

Weight 41 lbs
Dimensions 9 × 12 × 17 in
Manufacturer Part Number

Reviews

There are no reviews yet.

Be the first to review “Sterlco FT96-6-60 Float & Thermostatic Trap Brass & Stainless Steel Trim 1.5″ NPT 60 PSI”

Your email address will not be published.

Share This