Description
The Wyckomar UV-700 Ultra Violet Water Sterilizer 24 gpm 240vAC is our best-selling ultra-violet sterilizer designed for the disinfection of drinking water in the average household at a flow flow range between 9.8 and 24.3 GPM (37 – 92 LPM). Typically installed at the point of entry, it can treat municipal water as well as ground water from drilled or dug wells, and surface water from lakes, ponds or rivers. Other uses for this sterilizer are for the purification of all incoming water in various small commercial applications, such as coffee shops, doctor’s offices or hair salons. This sterilizer contains a low-pressure, high output UV lamp in a 304L stainless steel reaction chamber (also available in 316L). It comes with an electronic ballast that features a lamp-out alarm if there is no power to the lamp. Combined with a Wyckomar filter set, this sterilizer is the center piece of a complete water treatment system for the elimination of bacteria and viruses and reduction of taste and odor at the point of entry (see part # SYS700-QD4E-2).
Specifications
- Part Number: P700/QD4E-2
- Flow Rate: 37 – 92 LPM (9.8 – 24.3 GPM)
- Ports: 3/4″ NPT in/out
- Chamber Material: 304L Stainless Steel (316L SS optional)
- UV Dose: 16 mJ/cm2 (16,000 uWsec/cm2) @ 92 LPM / 24.3 GPM
- UV Dose: 30 mJ/cm2 (30,000 uWsec/cm2) @ 50 LPM / 17.2 GPM
- UV Dose: 40 mJ/cm2 (40,000 uWsec/cm2) @ 37 LPM / 9.8 GPM
- Power: 240 Volt AC / 50 – 60 Hz
- Ballast: Electronic Ballast w/ Lamp Out Alarm, Power LED Count of Total Running Days on LCD Display (Re-settable) Model RH51-425-40L (Wyckomar Part # 4-BE-425-ECO-R)
- Number of Lamps: 1 at 40 Watts, 425 mA (Part # RL-40/867T5) Low-Pressure UV
- UV Monitor: Optional (Part # 4-UV/MS-2 V3)
- Min/Max. Operating Temperature: Tmin. = 3 °C (37 °F), Tmax. = 40 °C (104 °F)
- Max. Operating Pressure: 125 psi – 8.6 bar (tested to 500 psi)
- Plumbing: 3/4” MNPT In/Out Chamber
- Material: 304L Stainless Steel (316L SS optional)
- Shipping Size and Weight: 1 box 45x7x7 inches, 12 lbs / 5.5 kg
Filtration
This UV sterilizer assumes certain water quality parameters to be met for proper operation. If the source water does not meet the following criteria, pre-treatment has to be considered:
- Turbidity (Suspended Solids): Must be < 1 NTU at the time of disinfection. There must be a 5 micron or less sediment pre-filtration system installed before the UV system.
- Total Hardness (Sum of Calcium and Magnesium): Must be < 10 gpg (grains per gallon)
- Iron: Must be < 0.3 ppm (parts per million)
- Manganese: Must be < 0.05 ppm
- This UV unit is available as complete system with appropriate pre-filtration (Part # SYS700/QD4E-2) or as pre-assembled All-in-One System for ‘plug-and-play’ installation (Part # SYS700-POU and SYS-MD1003)
Reviews
There are no reviews yet.