'
855-654-3833 - Hours 8-5 CST M-F
Select Page
Sale!

XW Power Distribution Panel 865-1015

$ 1,500.00 $ 1,220.00

The XW Power Distribution Panel (XW PDP) is factory-wired and labeled to support a codecompliant single-inverter installation. It has plenty of room to add wiring and breakers to expand
the XW System with up to three inverters, four charge controllers, or other equipment to support 120/240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit
knockout locations, the PDP can be configured to mount on either side of the inverter/charger. The XW Power Distribution Panel (XW PDP) is designed to save significant time and money during
installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW Conduit Box is supplied with each XW PDP.

Description

 

XW Power Distribution Panel 865-1015 optional balance-of-systems components for NEC compliant installations, includes pre-wired AC and DC circuit breakers, bus barsand multiple knockouts for conduit and additional breakers. The XW Power Distribution Panel (XW PDP) is factory-wired and labeled to support a code-compliant single-inverter installation. It has plenty of room to add wiring and breakers to expand the XW System with up to three inverters, four charge controllers, or other equipment to support 120/240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit knockout locations, the PDP can be configured to mount on either side of the inverter/charger.

The XW Power Distribution Panel (XW PDP) is designed to save significant time and money during installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW Conduit Box is supplied with each XW PDP.

Product Compatibility
The distribution panel and conduit box interface with the following products:
XW Connection Kit (for second XW Hybrid Inverter/Charger) and XW Conduit Box
XW4024, XW4548, and XW6048 Inverter/Chargers
XW Solar Charge Controllers (requires customer-supplied breakers and wiring)
C-Series Charge Controllers (requires customer-supplied breakers and wiring)
XW PDP dimensions (H x W x D): 30 x 16 x 8.25” (761 x 406 x 210 mm)
Shipping dimensions (H x W x D): 48 x 21 x 13.5” (1220 x 533 x 343 mm)
Shipping weight: 67.2 lb (30.5 kg)
XW PDP ships with:
Power Distribution Panel enclosure with a field-reversible panel door, pre-wired with:
Three 60 A, 120/240 Vac, two-pole, Square-D, Type QOU, DIN-rail mounted AC breakers for
AC input, Bypass, and AC Load
One GJ250A 160 Vdc, 3/8” stud DC breaker
One ground terminal bus bar
One neutral terminal bus bar
One battery negative terminal bus bar
One pair #4/0 AWG Arctic Ultraflex Blue™ Battery Cables (factory installed and labeled,
ready to connect)
#6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)
Room to expand – Five additional AC breaker positions for two-pole, 60 A Square D, Type QOU
breakers; 10 additional DC breaker positions (eight for charge controller breakers and two
for large GJ inverter breakers)
Mounting Plate
XW Conduit Box

 

865-1015 specifications

Additional information

Weight 70 lbs
Manufacturer Part Number

Reviews

There are no reviews yet.

Be the first to review “XW Power Distribution Panel 865-1015”

Your email address will not be published. Required fields are marked *

Share This