Description
Breaker Box Extends From Wall – Single phase 120/240, Wired
EMP Shield SP-120-240-W EMP & Lightning Protection + CME Defense, EMP Shield will protect all the electronics and equipment connected to your electrical system. This is accomplished by shunting (shorting) the over voltage coming in from the grid and the induced voltage that is collected within your home. Whether the source of electrons are from within your home or coming into your electrical system from outside the home (the grid), the Shield will see the surge and protect your electrical system. Our technology reacts in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the equipment before the voltage can rise high enough to damage any equipment. We call this new technology SightSpeed™
Features
- The Government has released an EMP Executive order & Homeland Security is urging people to get prepared quickly!
- Although the grid may be down, your electrical equipment and home will still be functional if you have EMP Shield.
- EMP Shield will ensure your vehicle operates after an EMP helping you get home, save family members, or even get supplies while others cannot.
- Your home will be 100% protected from lightning saving you thousands of dollars and months of time if you are hit with lightning.
- If you have a solar system or generator, you will have power and functional equipment while others do not!
- Industry Leading 10 Year Warranty
- Surpasses All Military EMP Testing Standards, MIL-STD-188-125-1, MIL-STD-464C, MIL-STD-461-GRS-105 (90,000 Volts)
Specifications
- Model: EMP Shield SP-120-240-W
- Phase: Single
- Voltage: 120/240
- UL 1449 – Type 2 SURGE SUPPRESSION – Compliant
- (MIL-STD-188-125-1) HIGH-ALTITUDE ELECTROMAGNETIC PULSE PROTECTION – Certified
- IEEE C62.41-1991 category A&B combination wave suppression
- Solid-state semiconductor circuitry for each phase
- Each phase independently fused
- Green LED diagnostic indicator for each phase
- NEMA 4 plastic enclosure • 1 conduit entrance port
- EMP Protection: All Phases an EMP (E1, E2, & E3)
- Solar Flares: Up to 228,000 Amps
- Lightning Protection: 100% Lightning (Guarantee Backed EMP Shield by a $25,000 Insurance Policy)
WARNINGS & CAUTIONS
- TO BE INSTALLED BY A LICENSED ELECTRICIAN AND/OR USED IN ACCORDANCE WITH ELECTRICAL CODES AND REGULATIONS.
- INSTALLATION OF AN EMP Shield IN A BRANCH CIRCUIT MUST BE DONE BY A QUALIFIED ELECTRICIAN.
- READ ALL INSTRUCTIONS BEFORE INSTALLING.
- EMP Shield DEVICES MUST BE INSTALLED ON A LINE THAT IS SERVED BY DISCONNECT MEANS, SUCH AS 20-AMP CIRCUIT BREAKERS OR 20-AMPFUSED DISCONNECT SWITCHES.
- EMP Shield MAY NOT SURVIVE SUSTAINED OVERVOLTAGES.
- USE THIS DEVICE ONLY WITH COPPER OR COPPER CLAD WIRE.
Reviews
There are no reviews yet.