TEL 262-654-3833 | Hours 8AM-5PM Central Standard Time M - F
Select Page
Sale!

RONK 30 KVA 3RLC Roto-Load Center

Original price was: $ 16,787.00.Current price is: $ 13,988.75.

The RONK 30 KVA 3RLC Roto-Load Center is designed for applications with three-phase (3Ø) electronic equipment or systems with line-to-neutral circuits that cannot be modified.

SKU: RK001-00336 Category: Tag:

Description

The RONK 30 KVA 3RLC Roto-Load Center is designed for applications with three-phase (3Ø) electronic equipment or systems with line-to-neutral circuits that cannot be modified. Most 3Ø electronic devices have specific +/- voltage tolerances that must be maintained under all operating conditions. Applications with hard-starting motors or wide load swings may require a larger converter. Best results are achieved between 20% and 80% of converter capacity. Loads that require better tolerances may require the use of a power conditioner as well.

RONK 30 KVA 3RLC Specifications:

  • Model: 30 KVA 3RLC
  • Weight: 865
  • 1Ø FLA: 125
  • Starting AMP: 450
  • Rotary Base Frame: 326RLC
  • Maximum 3Ø Load (A): 36

Features:

  • Minimum field connections – This system is designed, prewired, and packaged specifically to reduce the number of field connections. This lessens the chance of wiring errors and significantly lowers installation time and cost.

Applications:

  • AC variable speed drives
  • CNC machine tools
  • DC speed drives
  • EDM, lasers
  • Voltage-sensitive machinery

ROTO-LOAD Connection:

The Ronk ROTO-CON rotary converter consists of a rotary transformer and one or more capacitor panels. For UL Listed units, the rotary transformer and capacitor panels must be used together to maintain their listing

All wiring should be done by a qualified electrician in accordance with all applicable electrical codes. The ROTO-CON rotary transformers can operate from either 240 or 480 volt power but must be operated at the voltage rating of the capacitor panel(s). The capacitors in the #1 panel are connected across the “A” and “B” phases. The incoming single-phase lines become the “B” and “C” phases of the three-phase output (“A” phase is the manufactured phase). Use the “B” and “C” phases for any controls and single-phase loads if they are being powered from the converter; do not connect control circuits, control transformers, or other single-phase loads to the “A” phase; doing so may damage their components and/or result in improper operation. Refer to the load equipment information for any single-phase connections.

 

SPECIFICATIONS PDF

USER MANUAL PDF

WIRING 2RLC

WIRING 3RLC

RONK WARRANTY PDF

Additional information

Weight 865 lbs
Dimensions 21.13 × 20.88 × 15.63 in
Manufacturer Part Number

Reviews

There are no reviews yet.

Be the first to review “RONK 30 KVA 3RLC Roto-Load Center”

Your email address will not be published. Required fields are marked *

Share This