The Ronk ATS60012 600 Amp 1 Phase 240V Automatic Transfer Switch critical loads automatically in the event of a power outage. Constantly monitoring your business’ power, the Ronk ATS looks for power interruptions or failures caused by an accident or bad weather to instantly switch over to generator power. Leaving your critical machines, devices or appliances operating safely and efficiently. The Ronk ATS comes standard as NEMA 4 enclosure. Rated UL 1008 in Optional Standby and Emergency Rated options. Our user-friendly digital control module monitors the voltage and frequency of incoming AC supply. The controller comes factory set with common trips and time delays. It’s easy to change parameters, test and has the option to switch to manual mode if needed.
- Comes standard as NEMA 4 enclosure
- Rated UL 1008
- Available in Emergency in 600A single-phase
- User-friendly digital controller comes factory set with common trips and time delays.
- Easy to change parameters, test and has the option to switch to manual mode if needed
Control At Your Fingertips
The Ronk ATS60012 controller will monitor the voltage and frequency of the incoming AC supply from two different sources, which could be from generator or mains (utility), or a combination of both. The module will monitor S1 (source 1) and in the event of a failure will issue a start command to S2 (source 2). Once S2 is available and producing an output within limits, the module will control the transfer device and switch the load from S1 to S2. Once the S1 supply returns to within limits, the module will command a load return to S1 and shut down S2.
- Model Number: ATS60012
- Total System Amperage: 600 Amp
- Number of Poles: 2
- Voltage: 240V Single Phase
- Approximate Weight: 410 lbs.
- Type: NEMA 4
- UL Type: N06