Description
Schneider Electric 865-1032 Conext MPPT 80 Amp 600VDC Solar Charge Controller offers the highest voltage when looking at controllers available. When dealing with very high power solar arrays, wire size and the distance from the charge controller are critical design elements. The 600 volts DC input limit allows for a higher string voltage and and overall higher system efficiency. This model is perfect when your solar array must be mounted far away from the charge controller. If you simply configure your array for a higher voltage, you can deliver the power to the controller using a smaller wire size. When you consider the cost savings by using a smaller wire size, this controller may end up saving you a substantial amount of money on installation. This controller may also be used to charge batteries from high voltage grid tie arrays.
Optimum System Performance
- High power, 600 Vdc MPPT charge controller for DC coupled solar and storage
- 80A rating for output charging power up to 6 kW
- Flexibility for oversized PV array power ratings
- Ideal for grid tied self-supply and off-grid systems with high PV to battery to grid efficiency
- Ability to recharge dead batteries from solar, providing maximum energy resilience for longer duration grid outages
- Harvest more energy with shade tolerant fast sweep MPPT algorithm
- Offers 5 Year Warranty
SPECIFICATIONS
| Device Name | XW-MPPT80-600 |
| Battery Voltage | 24 Volts DC |
| 48 Volts DC | |
| Input Voltage Range | 195VDC to 600VDC (open circuit) |
| Cable Entry | 7/8″ and 1″ knock-outs |
| Wire Gauge Range | 14 AWG to 6 AWG |
| Weight | 30 lbs. |
| Enclosure Material | Sheet metal chassis |
| Ambient air temp. | -20° to 45° C |
| -4° to 113° F | |
| Operating altitude | 0 to 2,000 meters |
| 0 to 6,561 feet | |
| Standards | CSA 107.1 |
| UL 1741 | |
| Certifications | FCC Class B |
| Dimensions | 30″ x 8.6″ x 8.6″ |
Reviews
There are no reviews yet.