TEL 262-654-3833 | Hours 8AM-5PM Central Standard Time M - F
Select Page

Pentek ECP1-10 Pleated Cellulose Polyester Cartridges 1 Micron

Call for Price

Pentek ECP1-10 Pleated Cellulose Polyester Cartridges 1 Micron, 2.63 x 9.75 inches, 40-125ºF. (Wyckomar replacement Part# 14-WFS10-1PL)

Description

Pentek ECP1-10 Pleated Cellulose Polyester Cartridges 1 Micron, Pentek ECP Series Cartridges are manufactured from a special formulation of resin-impregnated cellulose and polyester fibers. This unique blend of materials provides a higher wet strength than regular cellulose cartridges. It also provides high flow rates and dirt-holding capacity while maintaining extremely low pressure drop.

The media is pleated around a polypropylene core for added strength. The pleated endcaps of the standard cartridges are immersed in a thermo-setting vinyl plastisol. The Big Blue cartridges have a molded endcap with gaskets. The pleated ends are sealed to the endcap with a thermoplastic adhesive. The overlap seam is sonically welded to reduce internal bypass, improving filtration efficiency.

Features

  • Replaces Pentek CP and HFCP Series Cartridges
  • Special formulation of resin- impregnated cellulose and polyester fibers
  • Lengths: 10 & 20 inches
  • Provides higher wet strength than regular cellulose cartridges
  • Minimal unloading and media migration
  • Nominal 1, 5, 20, 50 micron rating

Pentek ECP Series pdf

Specification

  • Filter Media: Cellulose polyester
  • Standard Endcaps: Vinyl plastisol
  • Big Blue Endcaps: Polypropylene
  • Core: Polypropylene
  • Temperature Rating: 40-125ºF (4.4-51.7ºC)
  • Model: ECP1-10*
  • End cap: Tan
  • Maximum Dimensions: 2.63 x 9.75 inches (67 mm x 248 mm)
  • Rating Nominal: 1 micron
  • Initial (PSI) @ Flow Rate (GPM): <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
  • Standard 10 inch cartridge: 6 ft2

* WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

** Wyckomar Part# 14-WFS10-1PL

Additional information

Weight .5 lbs
Dimensions 9.75 × 2.63 × 2.63 in
Manufacturer Part Number

Reviews

There are no reviews yet.

Be the first to review “Pentek ECP1-10 Pleated Cellulose Polyester Cartridges 1 Micron”

Your email address will not be published. Required fields are marked *

Share This