'
TEL 262-654-3833 | Hours 8AM-5PM Central Standard Time M - F
Select Page
Sale!

Xantrex C12 C Charge Controller 12 Amp

$ 105.24

The Xantrex C12 C Charge Controller 12 Amp is uniquely sophisticated. As a charge controller, it features three-stage charging, user definable voltage parameters, and automatic equalization. Standard in the C12’s load control circuitry are field adjustable low voltage disconnect and reconnect points, along with a five minute low battery disconnect signal. The C12 also functions as a lighting controller.

Description

The Xantrex C12 C Charge Controller 12 Amp is uniquely sophisticated. As a charge controller, it features three-stage charging, user definable voltage parameters, and automatic equalization.

Standard in the C12’s load control circuitry are field adjustable low voltage disconnect and reconnect points, along with a five minute low battery disconnect signal. The C12 also functions as a lighting controller.

Lighting run time is adjustable from two to eight hours or can be set from dusk to dawn operation. It is used worldwide in a variety of applications, including remote village lighting systems and automatic outdoor lighting. An optional battery temperature sensor manages battery charging based on battery temperature.

Product Features:

  • Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
  • Two-year standard warranty
  • PV charge and load controller
  • Automatic lighting controller
  • Electronic detection of short-circuit, overload, over-temperature and reverse polarity conditions
  • Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
  • Field adjustable voltage and battery set point
  • Automatically disconnects from the battery at night
  • Compatible with negative ground and ungrounded systems

Xantrex C12 C Charge Controller 12 Amp Specifications:

Electrical Specifications:
  • Rated PV current: 12 A at 12 V only
  • Max. DC load: 12 A with auto reset
  • Min. operating voltage: 6 V
  • Max. PV open circuit array voltage: 25 V
  • Max. voltage drop (PV to battery): 0.3 V
  • Max. voltage drop (battery to DC load): 0.5 V
  • Regulation setting: 13 to 15 V
  • Equalize setting: Bulk plus 1 volt for two hours
  • Max. stranded wire size: #10 AWG stranded (5.2 mm2)
  • Typical consumption while charging: 0.007 A
  • Typical consumption with load disconnected: 0.003 A
General Specifications:
  • Power consumption, night time: 0.003 A
  • Enclosure material: Powder coated steel with strain relief for wiring and knockouts for up to 3.5 in conduits
  • Product weight: 0.9 kg (2.0 lb)
  • Shipping weight: 1.1 kg (2.5 lb)
  • Product dimensions (H x W x D): 16.5 x 11.0 x 4.0 cm (6.5 x 4.3 x 1.6 in)
  • Shipping dimensions (H x W x D): 20.3 x 11.7 x 4.0 cm (8.0 x 4.6 x 1.6 in)
  • Device mounting: Vertical wall mount – indoor only
  • Ambient air temperature for operation: 0°C to 40°C (32°F to 104°F)
  • Warranty: Two-year standard
  • Part number: C12

Specifications PDF

Additional information

Weight 2 lbs
Dimensions 6.5 × 4.3 × 1.6 in
Manufacturer Part Number

Reviews

There are no reviews yet.

Be the first to review “Xantrex C12 C Charge Controller 12 Amp”

Your email address will not be published.

Share This